ホーム > ブログ> C-type cable pulley installation diagram

C-type cable pulley installation diagram

July 16, 2018
Cable slide guide
I. Overview The product is used <br> <br> Italian CMOAS Chinese companies design the production line, it is provided by the key member CMOAS in a DM design CMOAS dosing delivery device type, the MCA series feed silo formula Feeders, SAM series leaf storage cabinets, SAD series wire storage cabinets, and FIFQ series storage trays and other tobacco production equipment are the ideal products for signal transmission of power supply and electronic devices for mobile travel motors and appliances. The indispensable accessory products of the crane factory can be mutually used with the imported products, and can also be used as a spare part of the equipment, and can be widely applied to the power transmission and distribution system of all moving carriages such as railway crossings, ports, freight yards, and manufacturing.

Second, the structural characteristics and working principle <br> <br> the product from flat cable, cable carrying four-wheel vehicles and rolling guide has three major components. Flat cable uses non-flammable materials, can be used for indoor and outdoor and contact with oil pollution places, has a certain degree of weather resistance, and has a smaller radius of bending radius than the round cable, long life and other advantages.

The cold rolled steel sheet is cold-drawn once in the rolling track to ensure the precision of the rail cross-section dimensions, which replaces the unsafe of the angle steel and other conductive methods. The weight is heavy, the indoor slide wire is dirty, and the outdoor ice causes the circuit to be short, which affects the use. Disadvantages, but also has the characteristics of domestic originality, the track unit length of 4 ~ 6m using coupler connector, can be extended to any length as needed.

The working principle of the product is shown in the engineering application diagram (1) The beginning of the flat cable (connected with the field junction box) is fixed on the starter of the lead rolling mill, and the space is allowed according to the allowable space for operation on the site (1-2.5mm) ) It is fixed to the four-wheel trolley carrying the cable in turn, and the cable end (connecting power supply) is set on the last trolley (truck). Through the reciprocating movement of the spring-pulled trolley on the cart, the dragging of the cable (length exceeding 20m, for example, the original traction rope should be taken into consideration so that the cable is free from pulling force), all the carts can be freely slid at any speed in the rolling path, and the rail is installed. Simple, no debugging, and no contact with the power supply, safe and reliable.

Third, the main technical data:

1, rated voltage: AC750V or less.

2, each core wire material and cross-sectional area: rubber sleeve flat flexible cable, stranded copper core wire 1.5-50mm2

3, the ambient temperature: -20 °C ~ +90 °C

4, four-wheel trolley running speed: <90m/min

5, four-wheel trolley working life: <3200h

6, the maximum static load allowed: 150kg

Fourth, the order need to know 1, track length (m)

According to the actual running distance of the vehicle, it is determined by the user's statistics, plus the distance for carrying the four-wheeled trolley.

2, cable length (m)

Actual run length + store trolley distance + required length for appliance and junction box.

3, the number of four-wheel trolleys is generally 1/2 of the total length of the track, the user can increase or decrease the number of four-wheel trolleys according to the allowed cable sagging space.

4, the number of coupling connectors:

According to the total length of the track, more than 4m tracks need fittings.


Fifth, the number of other accessories:

The number is based on the number of mobile vehicles. It is calculated by the user. Generally, each vehicle needs a set of accessories. Each set includes:

1. Guide rail stopper: 1 pc. 2. Cable holder 1 pc. at the beginning of the guide rail 3. Frame (car) 1 HXDL series cable slide

HXDL Series Cable Slip
HXDL series trailing coble

Model specifications
Type & Spec

Track section size (mm ) Track size

Fit car model
Suitable trolley

A

B

C

D

HXDL-33

33

40

14

2.0

DTC-33

HXDL-40

40

40

14

2.0

DTC-40

HXDL-50

50

50

16

2.5

DTC-50

HXDL-60

63

63

18

4.0

DTC-60

HXDL-70

72

68

twenty two

4.0

DTC-70

HXDL-100

100

100

35

6.0

DTC-100


Note: 1, the standard length of the track: 4m, 6m.

2, track material: cold-rolled steel plate, stainless steel Note: 1, Standardtracklength: 4m, 6m

2, trackmaterial:coldrectifingsheet, stainlesssteel

Remarks:

According to the actual needs of users to update the accessories, the product of the implementation of three bags, welcome to come to order the user letter. Our factory will serve the users wholeheartedly, make the cable slide guideway be a new step in the technology of feeding the mobile vehicle and make our due efforts.
私たちを苦しめます

著者:

Mr. Ricky

Eメール:

sales@marshine.net

Phone/WhatsApp:

+8613777009159

人気商品
業界ニュース
あなたも好きかもしれません
関連カテゴリ

この仕入先にメール

タイトル:
イーメール:
メッセージ:

あなたのメッセージmss

私たちを苦しめます

著者:

Mr. Ricky

Eメール:

sales@marshine.net

Phone/WhatsApp:

+8613777009159

人気商品
業界ニュース

ホーム

Product

Whatsapp

私たちに関しては

お問い合わせ

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

送信