Shower wheel pulley is easy to cause certain damage due to long-term contact with water. The shower wheel pulley is broken. We do not have to rush to call the maintenance company. We must know how to replace the shower room pulley with our own strength. Then, how to replace the shower room? What about the pulley ? Follow the footsteps of Xiao Bian to learn how to change the shower room pulleys yourself and quickly.
How to replace the shower room pulley replacement shower room pulley step
Replace the shower room pulley Step 1:
The installation of the pulley is part of the overall shower room. We all know that there is no steam generation device in the shower room. It is a sanitary unit consisting of shower room, shower, shower screen, top cover, bottom basin or bathtub. In the daily life for the shower room pulley replacement, many people have expressed some difficulties, in fact, we can learn to use the heart, so that it can save the next big maintenance costs. We can first place the stone base in the position to be installed, and place the lower rail in the middle of the stone base. After the installation, we will then install the left and right fixed glass. Finally, install the two side edge materials. (When installing the edge materials, the aluminum plug must be inserted into the up and down to the middle and the 4mm and 35mm screws are used to lock the edge material with the upper and lower rails).
Replace the shower room pulley Step 2:
We need to insert aluminum against the wall into the left and right edges, and then place the shower frame in the middle of the stone base. After we adjust the position of the shower block, we will use the aluminum against the wall. Make a mark on the opening of the material with a pencil, and don't forget to use a pneumatic drill to drill holes on the wall. After this, we will use plastic hammer to hammer the green expansion glue into the wall. Finally, we will move the shower room body frame to the stone base and lock it with screw and install the screw cover.
Replace the shower room pulley step three:
The next step is to install the pulley. At this time, we must install the active glass with the upper pulley into the upper rail.
Replace the shower room pulley Step 4:
Finally, in the final step, the lower pulley on the movable door glass is installed. Since the movable door is already mounted on the upper rail, the lower pulley on the movable door glass is installed at the installation method (the pulley is first installed on the movable door glass, The lower pulley is adjustable. After the lower pulley is installed, press and hold the adjustment button to snap it into the lower rail; install the water blocking strip and the magnetic stripe; and install the handle on the movable door glass.
The above steps on how to replace the shower room pulley and replace the shower room pulley are briefly introduced here, and I hope to help you. For more information, please visit this website. Stay tuned.
shower room
